The scanner is installed with a set of default applications such as Windows Mobile, laser scanner application etc. In order for it to work with TransLution installed it also needs .Net Framework 3 and the TransLution CAB file, version specific for your environment.

On a Windows 8 workstation load Windows Mobile Device Centre

 

 

Use the USB cable provided with the scanner to connect and sync the scanner to the PC. The form below shows a successful connection.

 

Once you have established a connection copy the following files to the scanner:

·         TransLution RF Scanner Setup.CAB

·         ClearJobs.bat

·         NETCFv35.wce.armv4.cab or armv4.cab

·         Messages.CAB

 

Copy the files to the following folder on the:  \System\SCANNER INSTALL

 

Note - Create a folder called SCANNER INSTALL in the System folder of the scanner. The System folder does not lose the files with in it if the scanner is reset or if the battery loses power.