Control Panel is accessed by doing the following:

·         Click on the Start logo in the task bar.

·         Click on Settings.

 

This is shown below

 

Control Panel

 

Power Settings   

While in the control panel, to change the power settings:

·         Switch to the ‘System’ tab

·         Click on ‘Power’.

 

Select Power Settings

                 

Under the ‘Advanced’ tab, Set the settings as shown below and click

‘OK’:

Power Settings

Scanner Settings   

 

In the Control Panel, within the ‘System’ tab look for Data Collection, click to open, once opened this window will appear

 

Data Collection Form

 

Under the ‘Data Options’ tab, click on ‘Symbology Settings’.

Symbology Settings

 

Check the Suffix and type in ^M. Click ‘OK’. This is to make the scanner auto enter after each successful scan.

Auto Return after Scan

Date and Time Settings

Within the control panel under the ‘System’ tab select ‘Clocks & Alarms’.

Set the date, the time and the time zone.

Date and Time Settings